Chapter 1717-19F-17-35If the machine is in safe mode,5-1) Click [Start Shutdown] so that the machine starts the shut-down sequence.6) When the machine starts up, it will write the system software to its HDD and flash ROM while showing the progress of writing on the control panel screen. Whendone, it will indicate a message asking you to turn off and then back on the power. In response, turn off and then back on the main power.Turning Off the PowerDo not turn off the machine's power while downloading or writing is under way; otherwise, the machine may fail to start up. If such is the case, execute HDDformatting, and download the system software once again.MEMO:You can remove the downloaded system software before it is written to the HDD or flash ROM. To do so, go through the following before restarting the machine:1) Click [Clear] [1].F-17-362) Click [Execute Clear] so that the system software that has been stored in the temporary storage area of the HDD will be removed.F-17-373) Click [OK]. Return to the previous page.F-17-38MEMO:After connecting, the following device information [1] is displayed on the right upper area of the SST screen.- IP address- Product name- Download modeMessageFollow the instructions shown on the machinefor shutdown process.Click [OK] button to return to Main Menu.O KSelectableFirmwareSelectableFir mwareControl172.16.1.100iPR_C1NORMALSYSTEMFirmware VersionActiveUSenXXXXnHoldUSenXXXXiRCONXXxxXXXXDCONXXxxXXXXMEAPCONTXXxxXXXXBOOTROMXXxxXXXXCRUIXXjaXXXXXXenXXXXLANGUAGEXXjaXXXXXXenXXXXDownloading completeServiceSupportTool DLM10 (Ver.3.22E)ClearC l i ck t h e bu t t o n o f t h e t a s k t o b eexe c u t e d .Download FirmwareUpload DataDownload DataRestore Backup SystemFormat HDDReturn to Main MenuShutdownO K[1]BOOTiPR_C1BROWSERDCONHDFormatiRCXXXXKEYG3FAXHELPLANGUAGEMEAPCONTMEDIARCONRUITTSWebDAVSYSTEMTSTMPMessageExecute ClearCancelDo you want to clear whole firmwaredownloaded to the machine?MessageThe downloaded firmware has been deleted.O K
