Chapter 99-52F-9-1353) Remove the external heat sub thermistor [1].- 1 screw [2]- 1 mount [3]F-9-1369.7.18 Inlet Thermistor9.7.18.1 Preparation for Removing the Inlet MainThermistor/Sub Thermistor 0014-0182imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Open the front door.2) Pull out the fixing/feeding unit toward you.3) Remove the fixing belt unit. (page 9-38)Reference [Removing the Fix-ing Belt Unit]4) Remove the fixing belt. (page 9-42)Reference [Removing the FixingBelt]9.7.18.2 Removing the Inlet Main Thermistor/SubThermistor 0014-0183imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Remove the heater contact cover [1].- 2 screws (black) [2]- 1 mount [3]- 1 screw [4]- 1 screw (silver) [5]F-9-1372) Remove the inlet main thermistor [1] and the sub thermistor [2].- 2 screws [3]F-9-138Be sure not to damage or break the steering roller overlapped with the inletthermistor / inlet sub-thermister when isolating it.Points to Note When Mounting the Inlet Main Thermistor/SubThermistorMake sure not to pinch harnesses to the areas [A] and [B] shown in the figurebelow.F-9-1399.7.19 Fixing Thermal Switch9.7.19.1 Preparation for Removing the Fixing ThermalSwitch 0014-0206imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Open the front door.2) Pull out the fixing/feeding unit toward you.9.7.19.2 Removing the Fixing Thermal Switch 0014-0207imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / image-PRESS C1+1) Detach the fixing upper cover [1].- 2 stepped screws [2]- 1 screw [3][1] [3] [2][1] [2] [3][2][3][4][5][1][1][2][3][A][B][A][B]
