Chapter 99-25F-9-25[1] Cleaning web[2] Web take-up rollerSL11: Web solenoidTake-up amount of the webSmall size: A4/A4R/B5/B5R/A5R/LTR/LTRRLarge size: A3/B4/LGR/LGLError code:E005 (Web wrapping error)0001 In the case of detecting open circuit of the web solenoid9.5.2 Control of the Fixing Cleaning Web Length Detection 0013-3411imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+The following is the method to detect cleaning web length and the content of control.1) During the initial phase of use, the fixing web, which is wrapped around the web take-up roller, is wrapped by the web take-up roller as the copy/print are made.2) When the fixing web found on the web feed roller decreases, the web length detecting arm 1 moves in the direction of the arrow, causing the web length detectingarm 2 block the light path to the web level sensor (PS22). After this sensor detection, when the fixing web solenoid is ON for 4 times, warning message for fixingweb length is displayed on control panel.State The number of web SL ON RemarksDuring the warm-up Once per 30 sec Change of the number of ON according to the warm-uptimeDuring the jam recovery 10 In the case that the detection temperature of the fixingmain thermistor is 145 deg C or more20 In the case that the detection temperature of the fixingmain thermistor is less than 145 deg C.During the print Black and white mode/small size 1 1Black and white mode/large size 1 2Color mode/small size 1 1Color mode/large size 1 2FRFRONTREAR[1][2]SL11
