Chapter 22-63F-2-2035) Check the folliwing settingService mode: COPIER > OPTION > BODY > CLCONFIGMake sure that this setting is set to "0".2.2.23 Turning the Main Power ON 0020-5078imagePRESS C1+ (Printer) / imagePRESS C1+1) Connect the 2 power plugs (1 for the backside, and 1 for the left side ofthe machine) of the machine to different power outlets, and turn on themain power [1].F-2-204F-2-2052) Check the sett of 4-color/5-color model.Service mode: COPIER > OPTION > BODY > CLCONFIG- In case of 4-color model, make sure that this setting is set to "1".- In case of 5-color model, make sure that this setting is set to "0".2.2.24 Turning the Main Power ON 0020-7010imagePRESS C1+ (Printer) / imagePRESS C1+1) Connect the power cable with the inlet on the main body.2) Connect the 2 power plugs (1 for the backside, and 1 for the left side ofthe machine) of the machine to different power outlets, and turn on themain power [1].Before turning the main power on, be sure to remove the packing materials.ONOFF[1]100V2.9A100V15A120V2.6A120V15.1A230V1.3A230V9.2AMAINSUBBefore turning the main power on, be sure to remove the packing materials.Use the correct power code to mach the location/area of installation. Makesure not to leave unused power code at the site.ONOFF[1]
