Chapter 1616-192PRNT-POS Set whether or not to perform a simultaneous pause for the subsequent print job when cancelinga job after an error occurs.Perform a simultaneous pause for a print job when a job cancellation (#037, etc.) occurs causedby an internal error, other than a service call error, in PDL printing.2Setting range0: Do not perform a simultaneous pause.1: Perform a simultaneous pause.Standard value0AFN-PSWD Use it to set restrictions on access in additinal functions mode.2settings0: off (shift to user mode scan without requiring password; default)1: on (shift to user mode scan after password match)PTJAM-RC Set whether or not to perform recovery of a PDL jam.This mode is used to set whether or not to perform recovery printing when a jam occurs in a PDLjob.2Setting range0: Do not perform recovery.1: Perform recovery.Standard value1This mode suits for operators who do not want recovery printing (e.g., receipt and payment slip)with jam recovery without being noticed by them.SLP-SLCT Use it to set the switch designed to switch between existing network-based applications.2A certain packet needs to be received as a condition for the machine to recover from sleep modevia network. Because the existing network system applications (e.g., Net Spot Accountant, imageWARE) do not send such packet, the machine fails to recover via network if it's shifted to sleepmode 3.When setting '1', the machine able to recover from sleep mode via network because it does notshift to sleep mode 3 (1wsleep), resulting the trade-off with the increase of consuming electricity.settings0: do not use (default); 1: useMEMO:This is not used at normal servicing.PS-MODE Selecting compatibility mode when using PS (image processing, print specification)2This is the mode to simulate REPLACE to hold compatibility for image processing and printspecification.settings0: no use of PS compatibility mode (default)1: image processing equivalent of iR2220/2800/3300 series (compatibility with existingmachines)2: image processing equivalent of iR105 (compatibility with existing machine)3: backup4: landscape image and portrait image can be duplexed printing using Canon controller. This isthe compatible mode with non-Canon controller.5 through 65535: backupWhen the setting value is '1', the output will be equivalent to that of iR2200 / 2800 / 3300 series.Whereas when the setting value is '2', the output will be equivalent to that of iR105 series.COPIER>OPTION>USERSubheading Contents Level
