Chapter 1616-210FDW-DLV Select the 'face up' or 'face down' delivery when specifying multiple copies.When multiple copies are specified, 'face up' delivery is usually performed. However, this modeis provided to perform 'face down' delivery to guarantee stacking condition.(However, this mode is invalid when a finisher is installed.)2Setting range0: 'Face up' for all setting for one sheet of document1: 'Face up' when specifying one copy, and 'face down' when specifying multiple copies for onesheet of documentStandard value0The setting mode becomes valid after the power switch is turned OFF/ON.RMT-LANG Switch the remote UI language used on Web.Setting methodSelect the language code using the +/- key. 2IFAX-LIM Restrict the number of lines output when receiving large volume of data by iFAX2Setting range0: No restriction0 to 999Standard value500SMTPTXPNChange the port number for SMTP transmission.2Setting range0 to 65535 (incremented by 1)Standard value25SMTPRXPN Change the port number of SMTP reception.2Setting range0 to 65535 (incremented by 1)Standard value25POP3PNChange the port number of POP reception.2Setting range0 to 65535 (incremented by 1)Standard value110UI-BOX Restrict the box screen display in the control panel.2Setting range0: BOX function unavailable (Unavailable for PDLtoBox)1: BOX function available2: BOX function available with restriction (Unavailable for LUI and RUI, but available forPDLtoBOX)Standard value1TMC-SLCT Switch the coefficient used for error diffusion.Use this mode to increase dot stability and granularity so that pitch unevenness or course imagethat occurred on an image can be made invisible.2Setting range0: Normal1: Low granularity / low stability2: High granularity / high stabilityStandard value0COPIER>OPTION>BODYSubheading Contents Level
