Chapter 88-13c. In case of duplexing re-pickupF-8-14p1: Point of start of acceleration (=a point where the trail edge reaches a point 20 mm downstream from the fixing nip area)p2: Point of stop of duplexing reversalp3: Point of stop of side registrationp4: Point of stop of duplexing re-pickupp5: Point of start of deceleration8.2 Basic Sequence8.2.1 Cassette Feeding 0012-8459imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+A4, plain paper, 2-sheet, Cassette 2 feeding, and face-up deliveryF-8-15*1: Stops at pre-registration position.There are acceleration/deceleration in the shaded intervals in the figure.8.2.2 Manual Feeding 0013-5548imagePRESS C1 P / imagePRESS C1 / imagePRESS C1+ (Printer) / imagePRESS C1+A4, plain paper, 2-sheet, and face-up deliveryInterval Paper delivery speed[A] Normal speed mode: 285 mm/sec1/3 speed mode: 95 mm/sec (=processing speed)[B] Normal speed mode: 627 mm/sec1/3 speed mode: 314 mm/sec[C] 600 mm/sec[D] 500 mm/secABCDEp5p4p3p2p1Cassette 1 / 2 pickup motor(M15)Cassette 2 pickup sensor(PS34)Cassette 2 pickup solenoid(SL5)Vertical path 2 sensor(PS54)Vertical path 2 motor(M13)OHT light-emitting/receivingsensor _ front/rear (PS5/6)Registration drive motor(M6)STBY PRINT LSTR*1*1*1*1
