Chapter 11-202. Paper Type Management SettingsThis feature enables to print with most optimal printing characteristics for each paper type by registering the characteristics of each paper type in the printer engine.Furthermore, parameters such as for curl correction and image position control can be changed for each paper type.This setting can be found in the following menu tree of the panel setting display.- Initial Setup / Save key > System Control Settings > Paper Type Management SettingsThe details of each setting are shown in the following table.T-1-12*1This item is displayed by executing service mode (COPIER > OPTION > BODY > IMAG-ADJ)1.2.3.11 Common Settings 0020-8552imagePRESS C1+ (Printer) / imagePRESS C1+* Indicates the default setting.*1 Indicates items that appear only when the appropriate optional equipment is attached.*2 Indicates items that appear only when Display Remaining Toner Error Message in System Settings (from theAdditional Functions screen) is set to 'On'.*3 Device Information Delivery SettingsAmong multiple machines on the network, registration of device information (administration data) in 1 parent machine [1] can transmit the same data to childmachines [2]. The child machines to which the device information was transmitted receives and updates the information.Display Item Settings Purpose Remedy Service ModeDefault display Name Enter any name.Default display Category Editing prohibited (standard/custom)Default display Grammage 64 to 256 g / m2 To register the thickness of thepaper.Default display Form Standard paper / Index paper /Punched paperTo register the style of thepaper.Default display Surface propertyHigh-quality paper / recyclepaper / coated paper (one-side)/ coated paper (both-sides) /embossed paper / vellum paper/ film / label / cotton paperTo register the type of thepaper.Default display Creep (displacementcorrection) 0.00 to 2.00 mmTo control the degree ofdisplacement for each type ofpaper when printeddocuments are bound up bythe saddle stitch.Displayed by serviceswitch (*1) Curl correction curl down / curl up (factorydefault: 0) degree of curling of the paper.The degree of curling has7 levels upward and 7more levels downward.Displayed by serviceswitch (*1)Media floatation fan airvolume controlweak / medium / strong(factory default: medium)The air volume at which thepaper is fanned can bemodified when faulty feedingoccurs while using the sidepaper deck - AA1 or whenuneven transfer occurs.Select [strong] when jamor double feeding occurs,and [weak] when papergets curled more thannecessary or whenuneven transfer occurs.Displayed by serviceswitch (*1) Image position controltest print output / leading edgeregistration position control /left end registration positioncontrolTo controls the image positionon the paper.Displayed by serviceswitch (*1)Secondary transfer voltagecontrol + / - 10 (factory default: 0)To control the secondarytransfer bias when faultyimage (uneven density, whitespot, etc.) occurs.Change the value to anative value. (The value1 in this case translates to100V.)COPIER >OPTION > BODY> 2TR-RVONDisplayed by serviceswitch (*1) Uneven Gloss Correction -2 to +2, 1*+ : increase gloss- :decrease glossTo adjust glossiness ofpaper.Changing valueswitches the fixingtemperature.
