Chapter 1616-236MB-CCVRestrict the use of the control card for mailbox.2Setting range0: Do not restrict the use.1: Restrict the use.Standard value0TRY-STPSet a mode not to perform printing when the tray is full.2Setting range0: Normal mode (Stop printing when the finisher tray is full.)1: Stop printing only by detecting the height.Standard value0MF-LG-STSet a key for the long length paper mode.2Setting range0: Normal1: Display the long length key in the corresponding mode screen.Standard value0CNT-DISPSet whether or not to display a serial number when pressing the counter check key.2Setting range0: Display a serial number.1: Do not display a serial number.Standard value0OP-SZ-DTSet ON/OFF of the document size detection function while the copyboard is open.2Setting range0: Do not perform the document size detection while the copyboard is open.- The document size must be manually entered in the control panel.1: Perform the document size detection while the copyboard is open.- Use this mode when you need to perform the document size detection automatically even whenyou cannot close the copyboard to make copies of a thick book, etc.- Detection is performed when the start key is pressed.Standard value0RemarksWhen SIZE-DET is set to 0, the document size detection is not performed even when OP-SZ-DTis set to 1.NW-SCAN Set whether or not to permit the network scan function.20: Do not permit the network scan function.1: Permit the network scan function.Standard value0HDCR-DSPSwitch the display/operation of HDD clear mode in the user mode.2Setting range1: Perform clear once with "0".2: Perform clear once with random data.3: Perform clear three times with random data.Standard value1MEMO: function for HDD initializationThis is the function to clear the data on HDD completely by overwriting the 0 (null) data andrandom data to file data area at the moment of deleting files logically (timing for deleting theadministrative information data) in HDD.COPIER>OPTION>USERSubheading Contents Level
