Chapter 1616-212FX-SPD Make a fine adjustment of the fixing roller speed.Make a fine adjustment of the fixing speed because the trail edge of paper contacts the ITB and itsometimes causes a fading image when the loop between the secondary transfer roller and thefixing roller is too large. When a fine adjustment is made to the fixing speed, the same adjustmentis made to the speed of delivery vertical path. When you increase the setting value, the speedbecomes faster.2Setting range-3 to 3Standard value0The setting value becomes valid after the main power switch is turned OFF/ON.STS-PORT Use it to turn on/off the T.O.T (TUIF over TCP/IP) async type status communication port.2Turns on/off the inquiry/response (sync) type status communication port for TUF over TCP/IP.settings0: off (default); 1: onFor service NAVI, set the value as '1' when connecting the PC and main body by crossing cable.MEMO:T.O.T (TUIF over TCP/IP)Communication protocol between embedded application presentation (UI) and applicationswithin the device including COPY/SEND/BOX etc., (Canon original protocol)CMD-PORT Use it to turn off/on the T.O.T (TUIF over TCP/IP) sync type command communication port.2Turns on/off the inquiry/response (sync) type command communication port for TUIF over TCP/IP.settings0: off (default); 1: onFor service NAVI, set the value as '1' when connecting the PC and main body by crossing cable.MEMO:T.O.T (TUIF over TCP/IP)Communication protocol between embedded application presentation (UI) and applicationswithin the device including COPY/SEND/BOX etc., (Canon original protocol)UISW-DSP Set 'hide' or 'not hide' of the SW to switch the display to the user screen.Set 'hide' or 'not hide' of the SW to determine which of the normal screen or the simple screen(Lawson type) is used.The following types of screen are available.- Screen that has the function similar to a standard machine- Screen that has limited function like the screen used at LawsonA user (a store manager) specifies 'hide' or 'not hide' of the SW to switch these screens.2Setting range0: Hide1: Do not hideStandard value0NS-CMD5 Restrict the use of CRAM-MD5 authentication in SMTP authentication. (NoSasl-Challengeresponse authentication mechanism; MD5 message digest algorithm)Make this setting when restricting the use of CRAM-MD5 authentication in SMTPauthentication.2Setting range0: Dependent on SMTP1: Do not use the authentication.Standard value0NS-GSAPI Restrict the use of GSSAPI authentication in SMTP authentication. (NoSasl-Generic SecurityService Application Program Interface)Make this setting when restricting the use of GSSAPI authentication in SMTP authentication.2Setting range0: Dependent on SMTP1: Do not use the authentication.Standard value0COPIER>OPTION>BODYSubheading Contents Level
