Eaton SmartWire-DT SWD Series Manual

4 PKE-SWD-32, interface for motor-starter combination with PKE PKE12/324.9 Programming110 SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.comByte 2:Motor current [%]Byte 3:Thermal motor image [%]Byte 4:Type of trip block, set time-lag classData bit Designation Description Notes0 - 3 Ir Set value I r ￫ Section 4.9.1.4, "Set value Ir", page 1114 - 6 TRIPR =Trip reasonTrip Reason ￫ Section 4.9.1.5, "Trip reason (TRIPR)", page1127 ACKR =AcknowledgerequiredZMR manual function acknowl-edgement required0: No acknowledgement required1: Acknowledgement of overloadrequired￫ Section 4.9.2.1, "ZMR operating modemanual", page 1167 6 5 4 3 2 1 0I-REL I-REL I-REL I-REL I-REL I-REL I-REL I-RELData bit Designation Description Notes0 - 7 I-REL Motor current [%] ￫ Section 4.9.1.6, "Motor current[%] (I-REL)", page 1137 6 5 4 3 2 1 0TH TH TH TH TH TH TH THData bit Designation Description Notes0 - 7 TH Thermal motor image [%] ￫ Section 4.9.1.7, "Thermal motorimage [TH]", page 1137 6 5 4 3 2 1 0– – CLASS CLASS CLASS TYPE TYPE TYPEData bit Designation Description Notes0 - 2 TYPE Control option part no. ￫ Section 4.9.1.8, "Type of tripblock (TYPE)", page 1143 - 5 CLASS Set time lag ￫ Section 4.9.1.9, "Time delaysetting (CLASS)", page 1146 Not used - -7 Not used - -