Eaton SmartWire-DT SWD Series Manual

7 Pilot devices M22-SWD…7.1 INTRODUCTIONSmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 1557 Pilot devices M22-SWD…7.1 INTRODUCTIONThe function elements M22-SWD... are combined together with front ele-ments of the RMQ-Titan system to form pilot devices that are capable ofcommunication. The switch position indications of the control elements andactivation of the indicator are implemented with the SmartWire-DT communi-cation system. In the case of function elements with LEDs, the indicatorbrightness can be adjusted to any of eight settings.The following function elements are available.These function elements are each available in two versions for front or basefixing.In addition to the modules listed above, the M22-SWD… range of productsfeatures a potentiometer and an encoder.These elements are available with a front mounting configuration.7.2 M22-SWD front mountM22-SWD front function elements are used in connection with the M22-Aadapter and M22 front elements for installation in consoles or control boxdoors.Function element DescriptionM22-SWD-K(C)11 a function element with a changeover contactM22-SWD-K(C)22 a function element with two changeover contactsM22-SWD-LED… an LED function element in white (W), red (R), green (G), blue (B), or multi-color (RGB)M22-SWD-K11LED… a function element with a changeover contact and an LED in white (W), red (R), green (G)or blue (B)M22-SWD-K22LED… a function element with two changeover contacts and an LED in white (W),red (R), green (G) or blue (B)Function element DescriptionM22-SWD-R Potentiometer with digital output for values of up to 10 bitsM22-SWD-INC Encoder designed to output relative change based on the user's rotary input