Eaton SmartWire-DT SWD Series Manual

13 Appendix13.7 Technical dataSmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 27313.7.5 Electronic motor-protective circuit-breaker PKE-SWD-..PKE-SWD-32 PKE-SWDPKE-SWD-CPGeneralStandards IEC/EN 61131-2, EN 50178,IEC/EN 60947IEC/EN 61131-2Dimensions W x H x D mm 45 x 39 x 77.5 45 x 70.3 x 47Weight kg 0.04 0.021Mounting on DILM7 - DILM32 at PKE12/32/65Mounting position as DILM7 - DILM32 as PKE12/32/65Ambient mechanical conditionsDegree of protection (IEC/EN 60529, EN50178, VBG 4) IP20 IP20Vibrations (IEC/EN 61131-2:2008)Constant amplitude 3.5 mm Hz 5 - 8.4 5 - 8.4Constant acceleration, 1 g Hz 8.4 - 150 8.4 - 150Mechanical shock resistance (IEC/EN 60068-2-27)semi-sinusoidal 15 g/11 msImpactresis-tances9 9Drop to IEC/EN 60068-2-31 mm 50 50Free fall, packaged (IEC/EN 60068-2-32) m 0.3 0.3Electromagnetic compatibility (EMC)Overvoltage category II IIpollution degree 2 2Electrostatic discharge (IEC/EN 61131-2:2008)Air discharge (Level 3) kV 8 8Contact discharge (Level 2) kV 4 4Electromagnetic fields (IEC/EN 61131-2:2008)80 - 1000 MHz V/m 10 101.4 - 2 GHz V/m 3 32 - 2.7 GHz V/m 1 1Radio interference suppression (SmartWire-DT) EN 55011 Class A EN 55011 Class ABurst (IEC/EN 61131-2:2008, Level 3)Fieldbus cable kV 1 1SmartWire-DT cables kV 1 1Radiated RFI (IEC/EN 61131-2:2008, Level 3) 10 10Ambient climatic conditionsOperating ambient temperature (IEC 60068-2) °C -25 up to +60 -25 up to +60Condensation Must be prevented with suit-able measuresMust be prevented with suit-able measuresStorage °C -30 up to +70 -30 up to +70Relative humidity, non-condensing(IEC/EN 60068-2-30)% 5 - 95 5 - 95SmartWire-DT interfaceFunction SmartWire-DT module (slave) SmartWire-DT module (slave)Baud rate setting Automatic AutomaticStatus SmartWire-DT LED green/orange GreenConnection Plug, 8-pole Plug, 8-polePlug connector External device plug SWD4-8SF2-5External device plug SWD4-8SF2-5Device supply voltageSWD moduleU SWD V DC,(%)14.5 (±3)Current consumption at U SWD mA ￫ Page 253