Eaton SmartWire-DT SWD Series Manual

13 Appendix13.7 Technical dataSmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 263CondensationStorage °C –40 - 70 –40 - 70Relative humidity, non-condensing (IEC/EN 60068-2-30) % 5 - 95 5 - 95Supply voltage U AUXRated operating voltage V 24 DC -15% +20%Residual ripple of input voltage % ≦ 5 ≦ 5Protection against polarity reversal Yes Yesmax. current I max A 3 3Short-circuit rating no, external fuse FAZ Z3Heat dissipation W Normally 1 Normally 1Potential isolation no noRated operating voltage of 24-V-DC modules V typical UAUX - 0.2 typical UAUX - 0.2Supply voltage U PowSpecifications for connection to supply voltage V – 24 DC -15 % +20 %Residual ripple of input voltage % – ≦ 5Protection against polarity reversal – Yesrated operational current I A – 0.7Overload proof – YesInrush current and duration A – 12.5 A/6 msHeat dissipation at 24 V DC W – 3.8Potential isolation between U Pow and 15 V SmartWire-DT supplyvoltage– YesBridging voltage dips ms – 10Repetition rate s – 1status display LED – YesSmartWire-DT supply voltage USWDRated operating voltage U e V 14.5 ± 3 % 14.5 ± 3 %max. current I max A 0.7 0.7Short-circuit rating – YesConnection supply voltagesConnection type Push in terminalssolid mm2 0.2 - 1.5 (AWG24 - 16)Flexible with ferrule mm2 0.25 - 1.5 0.25 - 1.5System SmartWire-DTModule type – –Number of SmartWire-DT modules – –Baud Rate kbps – –Address allocation – –status display – –Porting 2 x plug, 8 polePlug connector 2 blade terminals SWD4-8MF2EU5C-SWD-PF1-1 EU5C-SWD-PF2-1