Eaton SmartWire-DT SWD Series Manual

11 Interface for NZM compact circuit-breakers11.2 Surface mountingSmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 22911.2.1 Indication and connection elementsThe network status of the module is signalled via the SmartWire-DT diagnos-tics LED.The other LEDs have the following function:11.2.2 PortingThe module does not require an auxiliary power supply, it is supplied com-pletely via the SmartWire-DT connecting cable.C on Communication with the circuit-breaker via data cable activeoff No communication with the circuit-breaker2x- Without functionS For indicating the S0 energy pulseson A momentary off state indicates an energy pulse.off No power supply via SmartWire-DTflashing / ~ 1 Hz Power meters invalidI0 on Voltage at I0off No voltage at I0I01 on Voltage at I1off No voltage at I1Q0 on Output Q0 is onoff Output Q0 is offQ1 on Output Q1 is onoff Output Q1 is off￫ The voltage state of the inputs is indicated:￫ The voltage state of the outputs is indicated:I0 Led 0 1 0 1I1 Led 0 0 1 1Circuit-breaker status - off Trip onQ0 Led 0 1 0 1Q1 Led 0 0 1 1Attribute ID - OFF ON -