Eaton SmartWire-DT SWD Series Manual

13 Appendix13.7 Technical dataSmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 267Overload proof yes, with diagnos-ticsStatus display inputs LED yellow yellow yellow yellowDigital semiconductor outputsQty. – 4 8Output current A – normally 0.5 at24 V DCnormally 0.5 at24 V DCShort-circuit detectionthresholdA – max. 1.2 over 3 ms max. 1.2 over 3 mslamp load R LL – ≦ 3W ≦ 3WOverload proof – yes, with diagnos-ticsyes, with diagnos-ticsSwitching capacity – EN 60947-5-1 utili-zation category DC-13EN 60947-5-1 utili-zation category DC-13Relay outputsQty. – – 2 – –Contact type – – Make – –c (contacts)Utilization category AC-1, 250V, 4 A– – > 5 x 10 4 – –Utilization category AC-15, 250V, 3 A– – > 5 x 10 4 – –Utilization category DC-13, 24V, 1 A– – > 2 x 10 5 – –Safe disconnection V AC – – 230 – –minimum load current mA – – 100 mA , 12 V DC – –Response/reset time ms – – 5/2.5 – –Bounce duration ms – – Normally 1.5 – –Short circuit protection – – external 4 A gL/gG – –Status display outputs LED – – yellow yellow yellowPotential isolationInput to SmartWire-DT Yes Yes Yes Yes –Output to SmartWire-DT – no Yes Yes YesInput to input no no no no –Output to input – no Yes no –Output to output – no Yes no noNotes 1) Minimum length 8 mmEU5E-SWD-8DX EU5E-SWD-4DX EU5E-SWD-4D2R EU5E-SWD-4D4D/EU5E-...-4D4D-REU5E-X8D