Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 103f When the correction of [KEYSTONE] is large, edges of characters may be lost. (Only for PT-RW630)[IMAGE ROTATION]Set whether to rotate the input image when projecting.1) Press as to select [IMAGE ROTATION].2) Press qw to select an item.f The items will switch each time you press the button.[OFF] Projects the input image without rotating.[CLOCKWISE] Rotates the input image by 90° clockwise and project it.[COUNTERCLOCKWISE] Rotates the input image by 90° counterclockwise and project it.Notef [IMAGE ROTATION] cannot be set during [P IN P].f The on-screen display direction does not change even when [IMAGE ROTATION] is set to other than [OFF]. Set the [DISPLAY OPTION]menu → [ON-SCREEN DISPLAY] → [OSD ROTATION] (x page 100) as necessary.[BACK COLOR]Set the display of the projected screen when there is no signal input.1) Press as to select [BACK COLOR].2) Press qw to switch the item.f The items will switch each time you press the button.[BLUE] Displays the entire projection area in blue.[BLACK] Displays the entire projection area in black.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[NONE] Disables the startup logo display.Notef When [USER LOGO] is selected, the display of the startup logo will be kept for approximately 15 seconds.f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[UNIFORMITY]Correct the brightness and color unevenness of the entire screen.Setting by each color1) Press as to select [UNIFORMITY].2) Press the button.f The [UNIFORMITY] screen is displayed.3) Press as to select [VERTICAL] or [HORIZONTAL].
