Chapter 4 Settings — [DISPLAY OPTION] menu92 - ENGLISHAdjusting the color matching using a colorimeterUse a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN],[MAGENTA], [YELLOW], or [WHITE] to desired colors.1) Press as to select [COLOR MATCHING].2) Press qw to select [MEASURED].3) Press the button.f The [MEASURED MODE] screen is displayed.4) Press as to select [MEASURED DATA].5) Press the button.f The [MEASURED DATA] screen is displayed.6) Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.7) Press as to select a color, and press qw to adjust the setting.f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.8) Once all the input is completed, press the f The [MEASURED MODE] screen is displayed.9) Press as to select [TARGET DATA].10) Press the button.f The [TARGET DATA] screen is displayed.11) Press as to select a color and press qw to input coordinates for desired colors.f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.12) Once all the input is completed, press the Notef Colors are not displayed properly when target data is a color outside the region of this projector.f Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors.f When using a colorimeter or similar instrument to take measurement, measure the colors displayed with [AUTO TESTPATTERN].f A difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instrumentsand measurement environments used.[COLOR CORRECTION]Colors can be adjusted and registered for each input signal format.1) Press as to select [COLOR CORRECTION].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Standard setting[USER]For each of the following four signal formats, VIDEO, Y/C, RGB, and YCBCR /YPBPR, six colors of red,green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the buttonto set the details. Adjustment is possible within the range of - 31 to +31.[SCREEN SETTING]Set the screen size.Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed. Set as necessary for thescreen in use.1) Press as to select [SCREEN SETTING].2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.
