Chapter 4 Settings — [TEST PATTERN] menuENGLISH - 127[TEST PATTERN] menuOn the menu screen, select [TEST PATTERN] from the main menu.Refer to “Navigating through the menu” (x page 67) for the operation of the menu screen.f Press qw to switch.[TEST PATTERN]Display the test pattern built-in to the projector.Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing variousadjustments.1) Press qw to switch the [TEST PATTERN] item.f The items will switch each time you press the button.Menu screen + All whiteDisplays test patterns with the menu screen. Select a test pattern so that it is easy to make variousadjustments.Menu screen + All blackMenu screen + WindowMenu screen + Window(inversion)Menu screen + Color bar(vertical)Menu screen + Color bar(horizontal)Menu screen + 16:9/4:3aspect frameMenu screen + FocusMenu screen + Entry screen Displays the menu screen and input signal.Built-in test patterns are not displayed.Notef Press the button on the remote control while the test pattern is displayed to hide the menu screen.Changing color or a focus test patternWhen the “Menu Screen + Focus” test pattern is displayed, the color can be changed.1) Press qw to select the “Menu Screen + Focus” test pattern.2) Press the button.f The [TEST PATTERN COLOR] screen is displayed.3) Press as to select a color, and press the button.f The test pattern color changed to the color selected.Notef The test pattern color settings return to [WHITE] when the projector is switched off.f Colors of the test patterns other than focus test patterns cannot be changed.
