Chapter 4 Settings — [DISPLAY OPTION] menu98 - ENGLISH5) Press qw to switch [EDID MODE].f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes data of EDID according to the setting of [SCREEN FORMAT].[USER] Sets [RESOLUTION] or [VERTICAL SCAN FREQUENCY] item to EDID.f When [DEFAULT] or [SCREEN FIT] is selected, proceed to Step 10).6) Press the button.f The [RESOLUTION] screen is displayed.7) Press asqw to select [RESOLUTION].f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p], [1600x900p],[1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].8) Press the button.f The [VERTICAL SCAN FREQUENCY] screen is displayed.9) Press qw to select [VERTICAL SCAN FREQUENCY].f Select [60Hz], [50Hz], [48Hz], [30Hz], [25Hz], or [24Hz].f [48Hz] can be selected only when [1920x1080i] is selected for [RESOLUTION].f [30Hz], [25Hz], or [24Hz] can be selected only when [1920x1080p] is selected for [RESOLUTION].10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].f The resolution and vertical scanning frequency settings may be required on your computer or video device.f After configuring settings, your computer or video device or the projector may be required to be restarted.f Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or videodevice.[DIGITAL LINK IN]Set the signal level when DIGITAL LINK input is selected.1) Press as to select [DIGITAL LINK IN].2) Press the button.f The [DIGITAL LINK IN] screen is displayed.3) Press as to select [SIGNAL LEVEL].4) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[64-940] Select this item when the HDMI terminal output of an external device (such as a Blu-ray disc player)is input to the terminal via a twisted-pair-cable transmitter.[0-1023] Select this item when the DVI-D terminal output or HDMI terminal output of an external device (suchas a computer) is input to the terminal via a twisted-pair-cable transmitter.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of theexternal device regarding the output of the external device.f The signal level is displayed for 30 bits of input.Setting [EDID MODE]1) Press as to select [DIGITAL LINK IN].2) Press the button.f The [DIGITAL LINK IN] screen is displayed.
