Panasonic PT-RZ670 Operating Instructions Manual

Also see for PT-RW630 series: Command manual

Contents

Panasonic PT-RZ670 Operating Instructions Manual Manual pdf 140 page image

Chapter 4 Settings — [NETWORK] menu140 - ENGLISHf For the LAN cable between the twisted-pair-cable transmitter and the projector, use a cable that meets the following criteria:g Compatible with CAT5e or higherg Shielded type (including connectors)g Straight-throughg Single wiref The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance isexceeded, image may be disrupted or a malfunction may occur in LAN communication.f When laying cables between the twisted-pair-cable transmitter and the projector, check that cable characteristics are compatible withCAT5e or higher using tools such as a cable tester or cable analyzer.When a relay connector is used, include it in the measurement.f Do not use a hub between the twisted-pair-cable transmitter and the projector.f Do not pull cables forcefully. In addition, do not bend or fold cables unnecessarily.f To reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the projectorwithout any loops.f Lay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables.f When laying multiple cables, run them side by side along the shortest distance possible without bundling them together.f After laying the cables, confirm that the value of [SIGNAL QUALITY] in the [NETWORK] menu → [DIGITAL LINK STATUS] is displayed ingreen to indicate normal quality. (x page 136)f For twisted-pair-cable transmitters of other manufacturers of which the operation has been verified with the projector, refer to thePanasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturers has been made forthe items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance problems caused bythe devices of other manufacturers, contact the respective manufacturers.Accessing from the web browser1) Start up the web browser on the computer.2) Enter the IP address set on the projector into the URL entry field of the web browser.3) Enter the user name and the password.f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lowercase).4) Click OK.f The [Projector status] page is displayed.