Chapter 4 Settings — [NETWORK] menu138 - ENGLISH[DIGITAL INTERFACE BOX]When the optional Digital Interface Box (Model No.: ET-YFB100G) is connected to the terminal, the main menu ofET-YFB100G is displayed. Refer to the Operating Instructions of ET-YFB100G for details.Notef When [EXTRON XTP] is set to [ON], [DIGITAL INTERFACE BOX] cannot be selected.f The operation guidance for the “RETURN” button is displayed on the menu screen of the Digital Interface Box. The projector does not havethe “RETURN” button, but same operation is available with the [Art-Net SETUP]Make settings to use the Art-Net function.1) Press as to select [Art-Net SETUP].2) Press qw to select an item.f The items will switch each time you press the button.[OFF] Disables the Art-Net function.[ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X.[ON(10.X.X.X)] Enables the Art-Net function and sets the IP address to 10.X.X.X.[ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].f When other than [OFF] is selected, proceed to Step 3).3) Press the button.f The [Art-Net SETUP] screen is displayed.4) Press as to select an item, and press qw to switch the settings.[NET] Enter [NET] to be used when the projector processes Art-Net.[SUB NET] Enter [SUB NET] to be used when the projector processes Art-Net.[UNIVERSE] Enter [UNIVERSE] to be used when the projector processes Art-Net.[START ADDRESS] Enter [START ADDRESS] to be used when the projector processes Art-Net.5) Press as to select [STORE], and press the button.6) When the confirmation screen is displayed, press qw to select [OK], and press the button.Notef If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.Network connectionThe projector has a network function, and the following operations are available from the computer using the web control.f Setting and adjustment of the projectorf Display of the projector statusf Sending E-mail messages when there is a problem with the projectorThe projector supports “Crestron Connected TM”, and the following application software of Crestron Electronics, Inc. can be used.f RoomView Expressf Fusion RVf RoomView Server EditionAttentionf When a LAN cable is directly connected to the projector, the network connection must be made indoors.Notef “Crestron Connected TM” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systemsconnected to the network using a computer.f For details of “Crestron Connected TM”, refer to the website of Crestron Electronics, Inc. (English only)URL http://www.crestron.comTo download “RoomView Express”, go to the following website of Crestron Electronics, Inc. (English only)URL http://www.crestron.com/getroomviewf A LAN cable is required to use the network function.
