Chapter 4 Settings — [SECURITY] menuENGLISH - 131[SECURITY] menuOn the menu screen, select [SECURITY] from the main menu, and select an item from the sub-menu.Refer to “Navigating through the menu” (x page 67) for the operation of the menu screen.f When the projector is used for the first timeInitial password: Press awsqawsq in order, and press the button.f After selecting the item, press asqw to set.Attentionf When you select the [SECURITY] menu and press the button, entering a password is required. Enter the preset password andthen continue operations of the [SECURITY] menu.f When the password has been changed previously, enter the changed password, and press the button.Notef The entered password is displayed with*marks on the screen.f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.[SECURITY PASSWORD]Display the [SECURITY PASSWORD] screen when the power is turned on with the switch set to the side. Whenthe entered password is incorrect, the operation will be restricted to the power standby <v> button, the button, and the (, , ) buttons.1) Press as to select [SECURITY PASSWORD].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Disables the security password entry.[ON] Enables the security password entry.Notef The [SECURITY PASSWORD] setting is set to [OFF] by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 124) isexecuted.f Change the password periodically that is hard to guess.f The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the switch to .[SECURITY PASSWORD CHANGE]Change the security password.1) Press as to select [SECURITY PASSWORD CHANGE].2) Press the button.f The [SECURITY PASSWORD CHANGE] screen is displayed.3) Press asqw and the number (<0> - <9>) buttons to set the password.f Up to eight button operations can be set.4) Press the button.5) Re-enter the password for the confirmation.6) Press the button.
