Chapter 4 Settings — [DISPLAY OPTION] menu96 - ENGLISHf [30Hz], [25Hz], or [24Hz] can be selected only when [1920x1080p] is selected for [RESOLUTION].10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].f The resolution and vertical scanning frequency settings may be required on your computer or video device.f After configuring settings, your computer or video device or the projector may be required to be restarted.f Output with resolution and vertical scanning frequency that have been set may not be performed depending on your computer or videodevice.[DVI-D IN]Switch the setting when the external device is connected to the terminal of the projector and the image is not projected correctly.1) Press as to select [DVI-D IN].2) Press the button.f The [DVI-D IN] screen is displayed.3) Press as to select [EDID].4) Press qw to switch the item.f The items will switch each time you press the button.[EDID3] Recognizes movie-based video signals and still image signals automatically.[EDID1] Select this item mainly when an external device that outputs movie-based video signals (such as aBlu-ray disc player) is connected to the terminal.[EDID2:PC] Select this item mainly when an external device that outputs still image-based video signals (such asa computer) is connected to the terminal.5) Press as to select [SIGNAL LEVEL].6) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[0-255:PC] Select this item when the signal output from the DVI-D terminal of an external device (such as acomputer) is input to the terminal.[16-235] Select this item when the signal output from the HDMI terminal of an external device (such as a Blu-ray disc player) is input to the terminal via a conversion cable or similar cable.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of theexternal device regarding the output of the external device.f The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 176) for a resolution thatsupports plug and play.Setting [EDID MODE]1) Press as to select [DVI-D IN].2) Press the button.f The [DVI-D IN] screen is displayed.3) Press as to select [EDID MODE].4) Press the button.f The [DVI-D EDID MODE] screen is displayed.5) Press qw to switch [EDID MODE].f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes data of EDID according to the setting of [SCREEN FORMAT].
