Chapter 3 Basic Operations — ProjectingENGLISH - 61Moving the lens to the home positionTo move the lens to the home position, perform the following procedure.1) Press the button on the remote control while the shift adjustment screen is displayed.f The [HOME POSITION] screen is displayed.LENSHOME POSITIONEXECUTECANCELENTERMENU2) While the [HOME POSITION] screen is displayed (for approximately five seconds), press the button.f [PROGRESS] is displayed in the [HOME POSITION] screen, and the lens returns to the home position.Notef The home position of the lens is the lens position when the lens is being replaced or when the projector is being stored, and it is not theoptical center of the screen.f You can also display the [HOME POSITION] screen by pressing the button on the control panel or the button on theremote control for at least three seconds.Adjustment range by the lens position shift (optical shift)Perform the lens position shift within the adjustment range.The focus may change when the lens position is shifted out of the adjustment range. This is because the movement of the lens is restrictedto protect the optical parts. Projection position can be adjusted with the optical axis shift based on the standard projection position in therespective range.Lens typeZoom lensStandard zoom lens, ET-DLE150, ET-DLE250,ET-DLE350, ET-DLE450 ET-DLE085PT-RZ670Standard projection positionProjected image height VProjected image width H0.5 V0.16 V0.1 H0.3 H0.1 HStandard projection positionProjected image height VProjected image width H0.5 V0.16 V0.1 H0.28 HPT-RW630Standard projection positionProjected image height VProjected image width H0.6 V0.16 V0.1 H0.3 H0.1 HStandard projection positionProjected image height VProjected image width H0.6 V0.16 V0.1 H0.28 HNotef When the optional fixed-focus lens (Model No.: ET-DLE055) is attached, the shift adjustment is not available.f When the optional fixed-focus lens (Model No.: ET-DLE030) is attached, adjust the lens position by following the procedures described inthe user manual provided with ET-DLE030.
