Chapter 2 Getting Started — Setting upENGLISH - 31Parts for ceiling mount (optional)The projector can be installed on the ceiling by combining the optional Ceiling Mount Bracket (Model No.: ET-PKD120H (for high ceilings),ET-PKD120S (for low ceilings), ET-PKD130H (for High Ceilings, 6-axis Adjustment)) and the Ceiling Mount Bracket (Model No.: ET-PKD130B(Projector Mount Bracket)).f Be sure to use the ceiling mount bracket specified for this projector.f Refer to the Installation Instructions of the ceiling mount bracket when installing and setting up the projector.Attentionf To ensure projector performance and security, installation of the Ceiling Mount Bracket must be carried out by your dealer or a qualifiedtechnician.Projected image and throw distanceRefer to the projected image size and projection distance to install the projector. Image size and image position can be adjusted in accordancewith the screen size and screen position. When the fixed-focus lens (Model No.: ET-DLE030) is attached, the projection relation between thescreen and the projector differs from that of other lenses. Refer to “For fixed-focus lens (Model No.: ET-DLE030)” (x page 32) for details.SDL (LW/LT)L1L1L (LW/LT)SW SHHSHSWProjected imageScreenScreen(Unit: m)L (LW/LT)*1 Projection distanceL1 Lens protrusion dimensionSH Projected image heightSW Projected image widthH Distance from the lens center to the bottom edge of the projected imageSD Projected image size*1 LW: Minimum projection distance when the Zoom Lens is usedLT: Maximum projection distance when the Zoom Lens is used(Unit: m)Projection lens Model No. Dimension for L1 (approximate value)Standard zoom lens 0.043ET-DLE055 0.027ET-DLE085 0.084ET-DLE150 0.044ET-DLE250 0.045ET-DLE350 0.051ET-DLE450 0.095
