Chapter 4 Settings — [ADVANCED MENU] menuENGLISH - 85[ADVANCED MENU] menuOn the menu screen, select [ADVANCED MENU] from the main menu, and select an item fromthe sub-menu.Refer to “Navigating through the menu” (x page 67) for the operation of the menu screen.f After selecting the item, press asqw to adjust.[DIGITAL CINEMA REALITY]You can increase the vertical resolution and enhance the image quality by performing cinema processing when the PAL (or SECAM) 576isignal, the NTSC 480i signal, and 1080/50i, 1080/60i are input.1) Press as to select [DIGITAL CINEMA REALITY].2) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Performs automatic detection and cinema processing. (Factory default)[OFF] Does not perform cinema processing.[30p FIXED] During 480i or 1080/60i signalinput Performs forced cinema processing (2:2 pulldown).[25p FIXED] During 576i or 1080/50i signalinputNotef In [DIGITAL CINEMA REALITY], the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30pFIXED]. (Vertical resolution will degrade.)f When [FRAME RESPONSE] is set to [FAST], [DIGITAL CINEMA REALITY] cannot be set.[BLANKING]You can adjust the blanking width if there are noises at the edge of the screen or the image is slightly running out from the screen while animage from the VCR or other devices are projected.1) Press as to select [BLANKING].2) Press the button.f The [BLANKING] adjustment screen is displayed.3) Press as to select [UPPER], [LOWER], [LEFT], or [RIGHT].f When [CUSTOM MASKING] is set to an item other than [OFF] ([PC-1], [PC-2], or [PC-3]), the blanking width can be adjusted to anyshape using the computer. Up to three blanking settings adjusted using the computer can be saved. (Only for PT-RZ670)To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase the product,consult your dealer.4) Press qw to adjust the blanking width.
