Panasonic PT-RZ670 Operating Instructions Manual

Also see for PT-RW630 series: Command manual

Contents

Panasonic PT-RZ670 Operating Instructions Manual Manual pdf 91 page image

Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 91[DISPLAY OPTION] menuOn the menu screen, select [DISPLAY OPTION] from the main menu, and select an item fromthe sub-menu.Refer to “Navigating through the menu” (x page 67) for the operation of the menu screen.f After selecting the item, press asqw to set.[COLOR MATCHING]Correct the color difference between projectors when using multiple projectors simultaneously.Adjusting the color matching as desired1) Press as to select [COLOR MATCHING].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Color matching adjustment is not carried out.[3COLORS] Adjusts the three colors [RED], [GREEN], or [BLUE].[7COLORS] Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].[MEASURED] Refer to “Adjusting the color matching using a colorimeter” (x page 92) for details about this mode.3) Select [3COLORS] or [7COLORS], and press the button.f The [3COLORS] or [7COLORS] screen is displayed.4) Press as to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA],[YELLOW], or [WHITE] for [7COLORS]).5) Press the button.f The [3COLORS:RED], [3COLORS:GREEN], or [3COLORS:BLUE] screen is displayed.For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.f Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.6) Press as to select [RED], [GREEN], or [BLUE].7) Press qw to adjust.f The adjustment value changes between 0 *1 and 2 048.*1 The lower limit varies depending on the color to be adjusted.Notef Operation when correcting the adjustment colorWhen the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.When correction color red is changed: Red is added to or subtracted from the adjustment color.When correction color green is changed: Green is added to or subtracted from the adjustment color.When correction color blue is changed: Blue is added to or subtracted from the adjustment color.f Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projectoror by a service person.f Pressing the button on the remote control will restore the factory default settings for all items.f If [COLOR MATCHING] is set to other than [OFF], [COLOR CORRECTION] is fixed to [OFF], and [COLOR TEMPERATURE] is fixed to[USER1]. (However, [WHITE BALANCE HIGH] cannot be adjusted.)