Chapter 6 Appendix — Technical informationENGLISH - 167Channel Control details Performance Parameter Default value Remark11 LockOperation not available 0-1270When “Operation notavailable” is set, operationsof all channels becomeunacceptable.Operation available 128-255Notef If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector usingthe Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reflect thecontrols of all channels to the projector, set “Lock” of channel 11 to “Operation not available” and then set back to “Operation available”.Control commands via LANWhen web control administrator rights password is set (Protect mode)Connecting1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request for aconnection to the projector.f You can obtain both the IP address and the port number from the menu screen of the projector.IP address Obtain from the [NETWORK] menu → [NETWORK STATUS]Port number Obtain from the [NETWORK] menu → [NETWORK CONTROL] → [COMMAND PORT]2) Check the response from the projector.Data section Blank Mode Blank Random number section TerminationsymbolCommandexample“NTCONTROL”(ASCII string)‘ ’0x20‘1’0x31‘ ’0x20“zzzzzzzz”(ASCII code hex number)(CR)0x0dData length 9 bytes 1 byte 1 byte 1 byte 8 bytes 1 bytef Mode: 1 = Protect mode3) Generate a 32-byte hash value from the following data using MD5 algorithm.f “xxxxxx:yyyyy:zzzzzzzz”xxxxxx Administrator rights user name for the web control (default user name is “admin1”)yyyyy Password of above administrator rights user (default password is “panasonic”)zzzzzzzz 8-byte random number obtained in Step 2)Command transmission methodTransmit using the following command formats.r Transmitted dataHeader Data section TerminationsymbolCommandexampleHash value(Refer to “Connecting” above)‘0’0x30‘0’0x30Control command(ASCII string)(CR)0x0dData length 32 bytes 1 byte 1 byte Undefined length 1 byter Received dataHeader Data section TerminationsymbolCommandexample‘0’0x30‘0’0x30Control command(ASCII string)(CR)0x0dData length 1 byte 1 byte Undefined length 1 byte
