Chapter 4 Settings — [PROJECTOR SETUP] menuENGLISH - 1232) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select an item, and press qw to set the local date and time.6) Press as to select [APPLY], and press the button.f The setting of the date and time will be completed.Setting the date and time automatically1) Press as to select [DATE AND TIME].2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].6) Press as to select [APPLY], and press the button.f The setting of the date and time will be completed.Notef To set the date and time automatically, the projector must be connected to the network.f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], [NTP SYNCHRONIZATION] will return to[OFF]. Also if [NTP SYNCHRONIZATION] is turned [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].f Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 148) for details.f If [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] (x page 124) is executed, [TIME ZONE] settings are reset to thefactory defaults. However, the date and time based on the local date and time setting (Coordinated Universal Time, UTC, Universal Time,Coordinated) will be maintained without being initialized.[LENS CALIBRATION]Automatically set the lens shift limit values and home position for the projector.1) Press as to select [LENS CALIBRATION].2) Press the button.f The confirmation screen is displayed.3) Press qw to select [OK], and press the button.f To cancel, select [CANCEL].f The lens moves up, down, left, and right to automatically set the lens shift limit values and home position.f The lens stops to complete the calibration.Notef [PROGRESS] is displayed on the menu during lens calibration. Cannot cancel mid-operation.f When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly.[SAVE ALL USER DATA]Save the various setting values as a backup in the built-in memory of the projector.1) Press as to select [SAVE ALL USER DATA].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.
