Chapter 4 Settings — [PROJECTOR SETUP] menu124 - ENGLISH4) When the confirmation screen is displayed, press qw to select [OK], and press the button.f [PROGRESS] is displayed while saving data.Notef Data set from the computer application is not included in [ALL USER DATA].[LOAD ALL USER DATA]Load the various setting values saved as a backup in the built-in memory of the projector.1) Press as to select [LOAD ALL USER DATA].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.4) When the confirmation screen is displayed, press qw to select [OK], and press the button.Notef The projector enters the standby mode to reflect the setting values when [LOAD ALL USER DATA] is executed.f Data registered from a computer is not included in [ALL USER DATA].[INITIALIZE]Return various setting values to their factory default settings.1) Press as to select [INITIALIZE].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.f The [INITIALIZE] screen is displayed.4) Press as to select an item to initialize.[ALL USER DATA]Returns all setting values including [REGISTERED SIGNAL], [NETWORK SETUP], [E-mail set up],and [USER LOGO] to the factory default settings.The projector enters the standby mode to reflect the setting values.[REGISTERED SIGNAL]Deletes all the setting values saved for each input signal.To delete only a part of a registered signal, perform the procedure described in “Deleting theregistered signal” (x page 128).[NETWORK/E-MAIL] Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.[LOGO IMAGE] Deletes the image registered in [USER LOGO].5) Press the button.6) When the confirmation screen is displayed, press qw to select [OK], and press the button.Notef Even when [ALL USER DATA] is executed, [UNIFORMITY], [OPERATING MODE], [MAX LIGHT OUTPUT LEVEL], and [STANDBY MODE]settings are not initialized.[SERVICE PASSWORD]This function is used by a service person.
