|
Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 93Model No. [SCREEN FORMAT] Range when [SCREEN POSITION] is selectedPT-RZ670[16:10] Cannot be adjusted.[4:3] Adjusts the horizontal position between -160 and 160.[16:9] Adjusts the vertical position between -60 and 60.PT-RW630 [16:10] Cannot be adjusted.[16:9] Adjusts the vertical position between -40 and 40.4) Press as to select [SCREEN POSITION].f When [SCREEN FORMAT] is set to [16:10], [SCREEN POSITION] cannot be selected and adjusted.5) Press qw to adjust [SCREEN POSITION].[AUTO SIGNAL]Set whether to execute automatic setup of signals automatically.The screen display position or signal level can be adjusted automatically without pressing the button on the remote controlon each occasion if you input unregistered signals frequently at meetings, etc.1) Press as to select [AUTO SIGNAL].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Sets the auto signal function to off.[ON] Executes automatic setup automatically when images are changed to unregistered signals duringprojection.[AUTO SETUP]Set this when adjusting a special signal or horizontally long (such as 16:9) signal.Setting with [MODE]1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Standard setting.[WIDE] Select this item when an image aspect ratio is a wide-screen signal, which does not meet the[DEFAULT] setting.[USER] Select this item when receiving a signal with a special horizontal resolution (number of display dots).f When [DEFAULT] or [WIDE] is selected, proceed to Step 7).5) Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontalresolution of the signal source.6) Press as to select [MODE].7) Press the button.f Automatic adjustment is executed. [PROGRESS] is displayed while in automatic adjustment. When completed, the screen returns tothe [AUTO SETUP] screen.Adjusting position automatically1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [POSITION ADJUST].
|
