8.5 OptionsTable 8.5 and Table 8.6 give detailed information about the available options that allow Yaskawa drives to connect tocommunication networks. A host controller can control and monitor the drive, read and change parameters by using acommunication option. Contact Yaskawa or your Yaskawa agent to order options.• Option Selection: Refer to Yaskawa catalog for more details on option card selection and part numbers.• Option Installation: Refer to option unit manual for option unit installation instructions.u Interface OptionsTable 8.5 Interface Option UnitsOption Model FunctionRS-232C Interface SI-232/J Allows the user to connect an extension cable for remote operation and for use withDrive Wizard Plus.RS-232C Interface (Removable) SI-232/JC Allows the user to take advantage of the USB Copy Unit option and the RemoteLED Operator option.RS-422/RS-485 Interface forMEMOBUS/Modbus Communication SI-485/J Allows the drive to connect to a network using MEMOBUS/Modbus RTU protocol.Option includes a communication cable connector.Potentiometer AI-V3/J Allows for easier speed control.u Other OptionsTable 8.6 Other OptionsOption Model FunctionRemote LED Operator JVOP-182 Allows for remote operation when using the optional LED operator. This option isused in combination with the LED extension cable and the RS-232C interface.Option includes a Copy function for saving drive settings.USB Copy Unit JVOP-181 Saves and transfers parameter settings and connects to a PC for operation with DriveWizard Plus. This option is used in combination with the RS-232C interface.8.5 OptionsYASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual 1778 Peripheral Devices &Optionshttp://nicontrols.com
