A.2 Single/Three-Phase 200 V Class DrivesTable A.2 Power RatingsItem SpecificationThree-Phase: CIMR-Jo2A 0001 0002 0004 0006 0010 0012 0020Single-Phase: CIMR-JoBA <1> 0001 0002 0003 0006 0010 - -Maximum Motor Size Allowed (HP) <2> ND Rating 0.125& 0.25 0.25 0.5& 0.75 1.0 & 1.5 2.0 &3.0 3.0 5.0HD Rating 0.125 0.25 0.5 0.75 & 1 2.0 3.0 5.0Input Input Current (A)<3>Three-Phase ND Rating 1.1 1.9 3.9 7.3 10.8 13.9 24.0HD Rating 0.7 1.5 2.9 5.8 7.5 11.0 18.9Single-Phase ND Rating 2.0 3.6 7.3 13.8 20.2 - –HD Rating 1.4 2.8 5.5 11.0 14.1 - -OutputRated Output Capacity (kVA) <4> ND Rating 0.5 0.7 1.3 2.3 3.7 4.6 7.5HD Rating 0.3 0.6 1.1 1.9 3.0 4.2 6.7Output Current (A) ND Rating <5> 1.2 1.9 3.5(3.3) 6.0 9.6 12.0 19.6HD Rating 0.8 <6> 1.6 <6> 3.0 <6> 5.0 <6> 8.0 <7> 11.0 <7> 17.5 <7>Overload Tolerance ND Rating: 120% of rated output current for 1 minuteHD Rating: 150% of rated output current for 1 minute(Derating may be required for applications that start and stop frequently)Carrier Frequency 2 kHz (user-set, 2 to 15 kHz)Max Output Voltage (V) Three-phase 200 to 240 V (proportional to input voltage)Max Output Frequency (Hz) 400 Hz (user-adjustable)PowerSupplyRated VoltageRated Frequency Three-phase power: Three-phase 200 to 240 V 50/60 HzSingle-phase power: 200 to 240 V 50/60 HzAllowable Voltage Fluctuation -15 to 10%Allowable Frequency Fluctuation ±5%Harmonic Corrective Actions DC Link Choke Optional<1> Drives with a single-phase power supply input will output three-phase power and cannot run a single-phase motor.<2> Horsepower rating is based on 230 V Induction-Type Squirrel Cage NEMA B 4-Pole Motors as represented in NEC Table 430.250 Full-LoadCurrent, Three-Phase Alternating-Current Motors.<3> Input current rating varies depending on the power supply transformer, input reactor, wiring connections, and power supply impedance.<4> Rated motor capacity is calculated with a rated output voltage of 220 V.<5> Carrier frequency is set to 2 kHz (Swing PWM). Current derating is required in order to raise the carrier frequency.<6> Carrier frequency is set to 10 kHz. Current derating is required in order to raise the carrier frequency.<7> Carrier frequency is set to 8 kHz. Current derating is required in order to raise the carrier frequency.Note: Differences between Heavy Duty (HD) ratings and Normal Duty (ND) ratings for the drive include rated input and output current, overloadcapacity, carrier frequency and current limit. Set parameter C6-01 to “0” for HD or “1” for ND (default).A.2 Single/Three-Phase 200 V Class DrivesYASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual 181A Specificationshttp://nicontrols.com
