Type No. Terminal Name (Function) Function (Signal Level) Default SettingMainFrequencyReferenceInputA1 Frequency referenceInput voltage or input current (Selected by DIP switch S1 and H3-01)0 to +10 Vdc (20 kΩ),Resolution: 1/10004 to 20 mA (250 Ω) or 0 to 20 mA (250 Ω),Resolution: 1/500+V Analog input power supply +10.5 Vdc (max allowable current 20 mA)AC Frequency reference common 0 Vdcn Output TerminalsTable 3.7 Control Circuit Output TerminalsType No. Terminal Name (Function) Function (Signal Level) Default SettingMulti-Function DigitalOutputMA N.O. output (fault) Digital output30 Vdc, 10 mA to 1 A; 250 Vac, 10 mA to 1 AMinimum load: 5 Vdc, 10 mA (reference value)MB N.C. output (fault)MC Digital output commonMonitor Output AM Analog monitor output 0 to 10 Vdc (2 mA or less) Resolution: 1/256AC Monitor common 0 Vu Terminal ConfigurationS1 S2 S3 S4 S5 SC A1 +V AC AM ACMCMBMAFigure 3.11 Control Circuit Terminaln Wire Size and Torque SpecificationsSelect appropriate wire type and size from Table 3.8. For simpler and more reliable wiring, crimp ferrules to the wire ends.Refer to Table 3.9 for ferrule terminal types and sizes.Table 3.8 Wire Size and Torque Specifications (Same for All Models)Terminal ScrewSizeTighteningTorqueN•mTighteningTorque(in-lbs)Bare Wire Terminal Ferrule-Type TerminalApplic.wire sizemm2(AWG)Recomm.mm2(AWG)Applic.wire sizemm2(AWG)Recomm.mm2(AWG)Wire TypeMA, MB, MC M3 0.5 to 0.6 4.4 to 5.3Stranded: 0.25 to1.5(24 to 16)Single: 0.25 to 1.5(24 to 16)0.75 (18) 0.25 to 1.0(24 to 17) 0.5 (20)Shieldedline, etc.S1-S5, SC,+V, A1, AC,AM M2 0.22 to 0.25 1.9 to 2.2Stranded: 0.25 to1.0(24 to 18)Single: 0.25 to 1.5(24 to 16)0.75 (18) 0.25 to 0.5(24 to 20) 0.5 (20)3.7 Control Circuit Wiring44 YASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manualhttp://nicontrols.com
