STOPSTOPSTOPSTOPSTOP(2x)<1> Move to the right to change parameter settings. Scrolldown to view and check settings in the Setup Mode.<2> To return to the Top Menu, press . To view or editother parameters, press and .Control CircuitTerminal Select digitto editParameter DisplayLED OperatorFrequency referenceappears when powered upParameter DisplayPress untilappears<1><2>Figure 4.5 Setup Group Exampleu Changing Parameter Settings or ValuesThis example explains changing C1-01 (Acceleration Time 1) from 10.0 seconds (default) to 20.0 seconds.Step Display/Result1. Turn on the power to the drive. The initial display appears.2. Press the key until the Setup Mode Screen appears.3. Press the key to view the parameter setting display.4. Scroll through parameters by pressing the key until C1-01 appears.5. Press to view the current setting value (10.0). (Number farthest to the left flashes)6. Press until the desired number is selected. (“1” flashes)7. Press the key and enter 0020.0.8. Press and the drive will confirm the change.9. The display automatically returns to the screen shown in Step 4.10. Press the key until back at the initial display.4.3 The Drive and Programming ModesYASKAWA ELECTRIC SIEP C710606 31B YASKAWA AC Drive – J1000 Technical Manual 654 Start-Up Programming& Operationhttp://nicontrols.com
