8 Parameter8.7 Parameters for Other Functions or Applications8-45149235-1CDRE-CSO-A0318.7 Parameters for Other Functions or ApplicationsThese parameters make the settings for other functions or applications. S1CxG049 to S1CxG051: SMALL CIRCLE CUTTINGThese parameters prescribe cutting operation at small circle cutting. S1CxG052 to S1CxG053: SMALL CIRCLE CUTTING DIRECTIONLIMIT VALUEThese parameters set the cutting direction limits at small circle cutting. S1CxG054 to S1CxG055: SMALL CIRCLE CUTTING OVERLAPVALUEThese parameters set the overlapped value at small circle cutting. S1CxG063, S1CxG064: PATTERN CUTTING DIMENSIONThese parameters set the minimum diameter (S1CxG063) and the maximum diameter (S1CxG064) forthe pattern cutting in units of μm. S1CxG065: MIRROR SHIFT SIGN INVERSIONThis parameter sets which axis to be shifted (mirror-shift: invert the sign).S1CxG049(Minimum diameter): Set the minimum diameter of a figure in the units of μm that can beprocessed by small-circle cutting machine.S1CxG050(Maximum diameter): Set the maximum diameter of a figure in the units of μm that can beprocessed by small-circle cutting machine.S1CxG051(Maximum speed): Set the maximum cutting speed at operation by CUT instruction in theunits of 0.1mm/s.S1CxG052(+ direction): Set the limit value in the positive direction of cutting angle DIR set byCUT instruction, in the units of 0.01°.S1CxG053(- direction): Set the limit value in the negative direction of cutting angle DIR set byCUT instruction, in the units of 0.01°.S1CxG054(Operation radius): Set the operation radius at inner rotation in the units of 1 μm afteroverlapping by CUT instruction.S1CxG055(Rotation angle): Set the rotation angle at inner rotation in the units of 0.1° afteroverlapping by CUT instruction.1st axis (0: Not invert, 1: Invert)6th axis334 of 493
