9 Arc Welding Application9.5 Welding Condition Files9-47149235-1CDRE-CSO-A0319.5.4 Arc End Condition FileCOND NO. (1 to 396)Displays a condition number between 1 and 396.COMM.Displays a comment of 32 characters or less.CURRENT (1 to 999A)Welding current output value at the end of welding.VOLTAGE (0 to 50.0V, 50 to 150%)Welding voltage output value at the end of welding.ROBOT PAUSE TIME (0 to 10.00 seconds)The period during arc end when the manipulator is stopped.ANTI-STICKSpecifies whether the automatic wire anti-stick function is used or not.MONITORING(0 to 9.9 seconds)Wire stick monitoring time at the end of welding.WELDER CONTROL PRMTR (0000 to 9999, 10000: NOT USED)At the beginning of welding, the value (0 to 9999) specified in the “WELDER CONTROLPRMTR” is output to the following system register. At the end of welding, the same weldercontrol parameter can be specified, overwriting the same system register.System register for each application “WELDER CONTROL PRMTR“M468: device 1 (--> register for arc 1)M478: device 2 (--> register for arc 2)M488: device 3 (--> register for arc 3)M498: device 4 (--> register for arc 4)*Set the value to 10000 when “WELDER CONTROL PRMTR” is not used.DATA EDIT DISPLAY UTILITYARC END CONDITIONCOND NO.: 1/396COMM. weld1CURRENTVOLTAGEROBOT PAUSE TIMEANTI-STICKMONITORINGWELDER CONTROL PRMTR: 120 A: 80 %: 0.01 sec: OFF: 0.2 sec: NOT USED390 of 493
