9 Arc Welding Application9.6 Changing Welding Conditions During Playback9-61149235-1CDRE-CSO-A0319.6.3 Notes on Modification of Welding Conditions When Condition Data cannot be ModifiedIn the following cases, the window returns to the previous window of the ARC COND ADJUSTMENTwindow. Even if the function keys are pressed, current and voltage cannot be modified.• The mode is switched (to the teach mode, for example).• An emergency stop is ON.5 Line up the cursor with “Nochange data” and press[SELECT].Each time [SELECT] is pressed, the setting alternates between“No change data” and “Change data.”• To rewrite the modified condition file or additional item data, set“Change data.”The data are rewritten when the execution of the instructionwhich includes the changed condition data ends.• If “No change data” is set before execution ends, the data is notrewritten.Operation ExplanationDATA EDIT DISPLAY UTILITYARC COND ADJUSTMENTCURR(A)VOLT(%)DATA: 200 INST : ARCON: 100 INST : ARCON: Change dataDATA EDIT DISPLAY UTILITYARC COND ADJUSTMENTCURR(A)VOLT(%)DATA: 200 INST : ARCON: 100 INST : ARCON: No change dataSELECTEven if control jumps from one job to another job,rewriting of the arc condition for the former job isperformed.NOTE404 of 493
