3 - 46CHKADJCHANGING THE DIFFERENTIAL GEAR OIL/CHECKINGTHE CONSTANT VELOCITY JOINT DUST BOOTSCHANGING THE DIFFERENTIAL GEAR OIL1.Place the machine on a level surface.2.Place a receptacle under the differential gearcase.3.Remove: Oil filler bolt Drain plug 14.Drain: Differential gear oil5.Install: Drain plugNOTE:Check the drain plug gasket. If it is damaged,replace it with new one.6.Fill: Differential gear caseNOTE:If gear oil is filled to the brim of the oil fillerhole, oil may start leaking from the differentialgear case breather hose. Therefore, check thequantity of the oil, not its level.CAUTION:Take care not to allow foreign material toenter the differential gear case.7.Install: Oil filler boltPeriodic oil change:0.35 L (0.31 Imp qt, 0.37 US qt)Total amount:0.40 L (0.35 Imp qt, 0.42 US qt)Recommended oil:SAE 80 API “GL-4” Hypoid gearoilT R..10 Nm (1.0 m • kg, 7.2 ft • lb)T R..23 Nm (2.3 m • kg, 17 ft • lb)CHECKING THE CONSTANT VELOCITYJOINT DUST BOOTS1.Check: Dust boots 1Damage → Replace.Refer to “FRONT CONSTANT VELOCITYJOINTS AND DIFFERENTIAL GEAR” inCHAPTER 7.
