9 - 49– +ELEC2WD/4WD SELECTING SYSTEMEB803020TROUBLESHOOTINGProcedureCheck:1.Fuses (main, four-wheel drive)2.Battery3.Main switchIF THE GEAR MOTOR FAILS TO OPERATE:4.On-command four-wheel drive switch5.Gear motor6.Wiring connections(the entire 2WD/4WD selecting system)NOTE: Remove the following part(s) beforetroubleshooting:1)Seat2)Front carrier3)Front fender Use the following special tool(s) fortroubleshooting.Pocket tester:P/N. YU-03112-C, 90890-03112EB802011CONTINUITY1.Fuses (main, four-wheel drive)Refer to “CHECKING THE SWITCHES”.NO CONTINUITYReplace the fuse.EB802012CORRECT2.Battery Check the battery condition.Refer to “CHECKING THE BATTERY” inCHAPTER 3.Open-circuit voltage:12.8 V or more at 20 °C (68 °F)INCORRECT Clean the battery terminals. Recharge or replace the battery.CORRECT3.Main switchRefer to “CHECKING THE SWITCHES”.*INCORRECTReplace the main switch.
