8 - 3CHASFRONT AND REAR WHEELSCHECKING THE WHEELS1.Check: Wheel2.Measure: Wheel runoutOver the specified limit → Replace the wheelor check the wheel bearing plays 1.3.Check: Wheel balanceOut of balance → Adjust.Wheel runout limit:Radial 2: 2.0 mm (0.08 in)Lateral 3: 2.0 mm (0.08 in)WARNINGAfter replacing the tire, ride conservativelyto allow the tire to be properly seated in therim. Failure to do so may cause an accidentresulting in machine damage and possibleoperator injury.CHECKING THE WHEEL HUBS1.Check: Wheel hub 1Cracks/damage → Replace. Splines (wheel hub) 2Wear/damage → Replace.
