9 - 40– +ELECSIGNAL SYSTEMC0NTINUITYGOODCONDITIONWARNINGHandle the thermo switch (cylinder head)with special care.Never subject it to a strong shock or allowit to be dropped. Should it be dropped, itmust be replaced.T R..Thermo switch (cylinder head):8 Nm (0.8 m • kg, 5.8 ft • lb)Three bond sealock® #10*BAD CONDITIONReplace the thermo switch (cylinder head).3.Voltage Connect the pocket tester (DC 20 V) to thebulb socket connector.Tester (+) lead → Red/Black terminal 1Tester (–) lead → White/Blue terminal 2MEETSSPECIFICATION Turn the main switch to “ON”. Check the voltage (12 V).*OUT OF SPECIFICATIONThe wiring circuit from the main switch to thebulb socket connector is faulty, repair it.
