GENINFO1 - 7SPECIAL TOOLS90890-04135YM-04135Sheave fixed blockThis tool is needed when removing orinstalling the secondary sheavespring.90890-01404YM-01404Flywheel pullerThese tools are needed to removethe rotor.90890-01327YM-01327Damper rod holder (30 mm)This tool is needed to loosen andtighten the steering stem bearingretainers.90890-01426YU-38411Oil filter wrenchThis tool is needed to loosen ortighten the oil filter cartridge.90890-01430YM-38404Ring nut wrenchThis tool is needed to removing andinstalling the middle driven shaftbearing retainers.90890-01467YM-0146790890-01475YM-01475Gear lash measurement toolThis tool is used to measure the gearlash.90890-01474YM-01474Ball joint remover/installer setThis tool is used to remove and installthe ball joints.YM-01477Ball joint remover/installer attachmentsetThis tool is used to remove and installthe ball joints.90890-01701YS-01880-ASheave holderThis tool is needed to hold theprimary sheave when removing orinstalling the sheave bolts.Tool No. Tool name/How to use Illustration
