Yamaha YFM400FAR Service Manual
Also see for YFM400FAR: Owner's manualService manualAssembly manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 | |
Contents
|
8 - 12CHASFRONT BRAKEINSTALLING THE FRONT BRAKE MASTERCYLINDER1.Install: Brake master cylinder 1 Brake master cylinder bracket 2NOTE:The “UP” mark on the brake master cylinderbracket 2 should face up.T R..7 Nm (0.7 m • kg, 5.1 ft • lb)2.Install: Copper washers Brake hose Union boltNOTE: Tighten the union bolt while holding thebrake hose as shown. Turn the handlebar to the left and to the rightto check that the brake hose does not touchother parts (throttle cable, wire harness,leads, etc.). Correct if necessary.WARNINGProper brake hose routing is essential toinsure safe machine operation. Refer to“CABLE ROUTING” in CHAPTER 2.3.Fill: Brake fluid reservoirCAUTION:Brake fluid may damage painted surfacesor plastic parts. Always clean up spilledbrake fluid immediately.WARNING Use only the designated quality brakefluid: other brake fluids may deterioratethe rubber seals, causing leakage andpoor brake performance. Refill with the same type of brake fluid:mixing brake fluids may result in aharmful chemical reaction and lead topoor brake performance.Recommended brake fluid:DOT 460˚NewT R..27 Nm (2.7 m • kg, 19 ft • lb) |
Related manuals for Yamaha YFM400FAR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine