GENINFO1 - 6SPECIAL TOOLSYU-90050Crankshaft installer setThese tools are used to install thecrankshaft.AdapterYM-33279Spacer90890-04060YM-90070-AAdapter #11Spacer (crankshaft)These tools are used to install thecrankshaft.90890-01304YU-01304Piston pin puller setThis tool is used to remove the pistonpin.90890-01311YU-08035Tappet adjusting toolThis tool is necessary for adjustingthe valve clearance.90890-01312YM-01312-AFuel level gaugeThis gauge is used to measure thefuel level in the float chamber.90890-01325YU-24460-01Radiator cap testerThis tool is used to check the coolingsystems.90890-01352YU-33984AdapterThis tool is used to check the coolingsystems.90890-01348YM-01348Locknut wrenchThis tool is needed when removing orinstalling the secondary sheavespring.90890-04134YM-04134Sheave spring compressorThis tool is needed when removing orinstalling the secondary sheavespring.Tool No. Tool name/How to use Illustration
