9 - 13– +ELECIGNITION SYSTEMC0NTINUITYCORRECT8.Main switchRefer to “CHECKING THE SWITCHES”.*INCORRECTReplace the main switch.9.Pickup coil resistance Disconnect the AC magneto coupler fromthe wire harness. Connect the pocket tester (Ω × 100) to thepickup coil terminals.Tester (+) lead → White/Red terminal 1Tester (–) lead → White/Green terminal 2MEETSSPECIFICATION Check the pickup coil for the specifiedresistance.Pickup coil resistance:459 ~ 561 Ω at 20 °C (68 °F)(White/Red – White/Green)OUT OF SPECIFICATIONReplace the pickup coil/stator assembly.10.Charging/rotor rotation direction detectioncoil resistance Disconnect the AC magneto coupler fromthe wire harness. Connect the pocket tester (Ω × 100) to thecharging/rotor rotation direction detectioncoil terminal.Tester (+) lead → Red terminal 1Tester (–) lead → White/Blue terminal 2MEETSSPECIFICATION Check the charging/rotor rotation directiondetection coil for the specified resistance.Rotor rotation direction sensingcoil resistance:0.085 ~ 0.105 Ω at 20 °C (68 °F)(Red – White/Blue)*OUT OF SPECIFICATIONReplace the pickup coil/stator assembly.
