8 - 37CHASSTEERING SYSTEM Install the body 3, short bolt 5, removerwasher 6 and remover spacer 7 onto balljoint.NOTE: Remover washer 6 must be aligned with theprojection on the head of the ball joint. Surface a of the remover spacer 7 must bealigned with surface b of the steeringknuckle. Hold the body 3 in place while turning in theshort bolt 5 to remove the ball joint A fromthe steering knuckle. Remove the ball joint remover/installer.Ball joint remover/installer set:P/N. YM-01474/90890-01474Ball joint remover/installerattachment set:P/N. YM-014773 Body YM-0147490890-014744 Long bolt YM-0147490890-014745 Short bolt YM-014776 Remover washer YM-014777 Remover spacer YM-014778 Installer attachment YM-014779 Installer spacer YM-014770 Installer guide YM-01477 Install the long bolt 4, installer spacer 9and installer guide 0 onto the body 3.
