– 97 –– +ELECSIGNAL SYSTEM1.If the oil temperature warning light does not come on: Check that the light comes on when the start switch is pushed on. Check that the light comes on when the oil temperature is 145 °C (293 °F) or higher.CONTINUITY1.Bulb and bulb socketCheck the bulb and bulb socket forcontinuity.NO CONTINUITYReplace the bulb and/or bulb socket.2.Voltage Connect the pocket tester (DC 20 V) to thebulb socket coupler (wire harness side).Tester (+) lead → Red/Black terminal 1Tester (–) lead → White/Blue terminal 2MEETSSPECIFICATION Turn the start switch to “ ” and the mainswitch to “ON”. Check the voltage (12 V).OUT OF SPECIFICATIONThe wiring circuit from the main switch to thebulb socket connector is faulty, repair it.CORRECT3.Start switchRefer to “CHECKING THE SWITCHES” inCHAPTER 9. (Manual No.: 5TE-F8197-10)*INCORRECTReplace the handlebar switch (left).
