4 - 37ENGRECOIL STARTER AND A.C. MAGNETOREMOVING THE A.C. MAGNETO1.Remove: Starter pulley 1NOTE:Use the rotor holding tool 2 to hold the starterpulley.2.Remove: Crankcase cover (left) Gasket Dowel pinsNOTE:Working in a crisscross pattern, loosen eachbolt 1/4 of a turn. Remove them after all ofthem are loosened.Rotor holding tool:P/N. YU-01235, 90890-012353.Remove: Rotor 1NOTE:Use the flywheel puller 2.Flywheel puller:P/N. YM-01404, 90890-01404DISASSEMBLING THE RECOIL STARTER1.Remove: Cap 1 Starter handle 2NOTE:Before untying the knot 3 above the starterhandle, make a knot 4 in the rope so that therope is not pulled into the case.CHECKING THE A.C. MAGNETO1.Check: Stator assembly Pickup coilDamage → Replace.
